Home / New / Motor Graders / 16 Motor Grader

16 Motor Grader

Request a Quote

Overview

Specially configured for mine operation and haul road development and maintenance, the Cat® 16 maximizes availability and controls operating costs. Fuel efficient technologies and legendary Cat robust design and construction ensure these machines help your operation optimize profits.

Download Product Brochure Print

RELIABILITY YOU CAN COUNT ON

Reduce downtime and operating cost through improved serviceability, fuel economy and reduced maintenance, maximizing availability.
Major components are modular, so most can be removed and reinstalled without disturbing other components for peak repair efficiency.

PERFORMANCE AND PRODUCTIVITY

Motor graders have a direct impact on how productively all other mining machines operate – in particular in their role in haul road maintenance. The 16is optimized exactly to this goal:
Additional weight along with adjusted weight balance offers enhanced performance improving traction and the ability to keep ground speed, especially when carrying a large load.

ENSURING A SAFE JOB SITE

Caterpillar considers the safety of everyone in, on or around Cat equipment when developing products or enhancing safety features.
The 16has safety features including -

Access to Tandem
Rear View Camera
Seat Belt Indicator
Access Platform – optional

TOP-TIER SERVICE AND SUPPORT

Cat dealers are committed to helping you succeed, ensuring you have the right machine for the job, making parts available, operator training and providing a wide range of versatile work tools.

RELIABILITY YOU CAN COUNT ON

Reduce downtime and operating cost through improved serviceability, fuel economy and reduced maintenance, maximizing availability.
Major components are modular, so most can be removed and reinstalled without disturbing other components for peak repair efficiency.
C13 engine has been optimized to be as efficient without compromising performance. Eco mode can be activated to control high engine idle speed and ensure the engine is performing as efficiently as possible, offering additional fuel savings.
Center shift section of the front frame is a heavy-duty steel casting improving stress distribution for enhanced durability.
Rear frame structure is lengthened providing easy access to components in the engine enclosure as well as improved machine balance.
Front axle steering cylinder enhances durability and hydraulic lines are routed to improve reliability.
Modular cooling package provides simple removal and installation of components on the cooling system reducing service time.
Engine enclosure doors provide complete access to the engine without any enclosure post.
Extended maintenance intervals reduce the number of touches and downtime.
Fluid monitoring systems help prevent critical components from damage when levels are low.
Information Display in cab shows service/maintenance concerns and diagnostic codes are logged.

PERFORMANCE AND PRODUCTIVITY

Motor graders have a direct impact on how productively all other mining machines operate – in particular in their role in haul road maintenance. The 16is optimized exactly to this goal:
Additional weight along with adjusted weight balance offers enhanced performance improving traction and the ability to keep ground speed, especially when carrying a large load.
Available with three variations of the C13 engine depending upon sales region.
Emissions reduction technology is transparent, with no action required from the operator.
Multi-color / touch screen information display is the operator's gateway to monitoring machine performance and provides convenient way of modifying machine parameters to tailor performance to the current task. Assist in providing service information for troubleshooting.
Cat Product Link™ Elite integrates into the machine, taking guesswork out of equipment management. Provides easy access to machine location, hours, fuel usage, idle time and event codes via the online VisionLink® user interface helping you manage your fleet and operating costs.
Manage your fleet of machines while reducing fuel burn with Cat Production Measurement System option. The Efficiency Coach and Application Segmentation work together to monitor operators and machines simultaneously. Measure your jobsite’s efficiency and productivity from anywhere on the website.

ENSURING A SAFE JOB SITE

Caterpillar considers the safety of everyone in, on or around Cat equipment when developing products or enhancing safety features.
The 16has safety features including -

Access to Tandem
Rear View Camera
Seat Belt Indicator
Access Platform – optional
Service Access Platform – optional
Fire Suppression Ready System – optional

TOP-TIER SERVICE AND SUPPORT

Cat dealers are committed to helping you succeed, ensuring you have the right machine for the job, making parts available, operator training and providing a wide range of versatile work tools.

Engine

Optimized VHP Range - Net: 216-259 kW (290-348 hp)
Displacement: 763in³
Number of Cylinders: 6
Derating Altitude - Tier 4/Stage IV/Japan 2014 (Tier 4): 12500ft
VHP Range - Net: 216-259 kW (290-348 hp)
Emissions (1): U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final)
Torque Rise - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent: 39%
Emissions (3): Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards â€“ depending on emission standards of specific country
Standard - Fan Speed - Maximum: 1,450 rpm
Standard - Fan Speed - Minimum: 550 rpm
Base Power (1st Gear) - Net - Metric: 294hp
VHP Range - Net - Metric: 216-259 kW (294-353 hp)
Derating Altitude - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent: 12973ft
Torque Rise - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent: 39%
Standard - Ambient Capability: 122°F
Torque Rise - Tier 4/Stage IV/Japan 2014 (Tier 4): 43%
Emissions (2): Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent Emission Standards â€“ depending on emission standards of specific country
Maximum Torque - ISO 9249 - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent: 1270lb/ft
Maximum Torque - ISO 9249 - Tier 4/Stage IV/Japan 2014 (Tier 4): 1306lb/ft
Maximum Torque - ISO 9249 - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent: 1270lb/ft
Derating Altitude - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent: 12176ft
Speed at Rated Power: 2,000 rpm
Bore: 5.1in
Stroke: 6.2in
Engine Model: Cat® C13
Base Power (1st Gear) - Net: 290hp

Operating Specifications

Note: Calculated with no slip and 23.5 R25 L-3 tires.
Articulation Angle - Left/Right: 20Â°
Reverse - 4th: 9.3mile/h
Forward - 2nd: 3.8mile/h
Top Speed - Reverse: 25.4mile/h
Forward - 1st: 2.8mile/h
Reverse - 1st: 2.2mile/h
Forward - 8th: 32.1mile/h
Reverse - 3rd: 6mile/h
Reverse - 2nd: 4.1mile/h
Reverse - 5th: 17.4mile/h
Reverse - 6th: 25.3mile/h
Forward - 3rd: 5.5mile/h
Top Speed - Forward: 32.1mile/h
Forward - 7th: 22mile/h
Turning Radius - Outside Front Tires: 30.5ft
Forward - 4th: 7.6mile/h
Forward - 5th: 11.8mile/h
Steering Range - Left/Right: 47.5°
Forward - 6th: 16mile/h

Standards

Note (2): The dynamic operator sound pressure level is 71 dB(A) for Stage IV certified configurations and 72 dB(A) for Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standard machines when measured according to the
Note (1): The dynamic spectator sound power level is 109 dB(A) for Stage IV certified configurations and 109 dB(A) for Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standard machines when measured according to the
ROPS/FOPS: ISO 3471:2008/ISO 3449:2005
Sound: ISO 6394:2008/ISO 6395:2008/ISO 6396:2008
Brakes: ISO 3450:2011
Steering: ISO 5010:2007

Optional Tire Arrangements

Wheel Group - 19.5×25 MP (5): Tires: 23.5R25 Michelin XLDD 2 Star L5
Wheel Group - 19.5×25 MP (4): Tires: 23.5R25 Michelin XHA 2 Star
Wheel Group - 19.5×25 MP (3): Tires: 23.5R25 Bridgestone VJT 1 Star
Wheel Group - 19.5×25 MP (2): Tires: 23.5R25 Bridgestone VKT 1 Star
Wheel Group - 19.5×25 MP (1): Tires: 23.5R25 Bridgestone VKT 2 Star

Ripper

Shank Holder Spacing - Maximum: 20in
Machine Length Increase, Beam Raised: 63.4in
Pry-Out Force: 43700lb
Ripper Shank Holders: 7
Penetration Force: 30311lb
Shank Holder Spacing - Minimum: 17.5in
Ripping Depth - Maximum: 17.8in

Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) or Tier 2/Stage II/Japan 2001 (Tier 2) - Metric

Gear - Forward 2nd: 294hp
Gear - Forward 5th: 315hp
Gear - Forward 1st: 294hp
Gear - Forward 8th: 353hp
Gear - Forward 6th: 325hp
Gear - Forward 7th: 332hp
Gear - Reverse 2nd: 294hp
Gear - Reverse 3rd-6th: 302hp
Gear - Forward 3rd: 302hp
Gear - Reverse 1st: 294hp
Gear - Forward 4th: 309hp

Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) or Tier 2/Stage II/Japan 2001 (Tier 2) - Net

Gear - Forward 2nd: 290hp
Gear - Forward 1st: 290hp
Gear - Forward 7th: 328hp
Gear - Forward 4th: 304hp
Gear - Reverse 2nd: 290hp
Gear - Reverse 1st: 290hp
Gear - Forward 5th: 311hp
Gear - Forward 6th: 320hp
Gear - Forward 3rd: 298hp
Gear - Forward 8th: 348hp
Gear - Reverse 3rd-6th: 298hp

Weights Tier 4/Stage IV/Japan 2014 (Tier 4 Final)*

Note (2): **Base operating weight calculated on standard machine configuration with 23.5 R25 tires, full fuel tank operator and ROPS cab.
Note (1): *For machines not equipped with Tier 4 Final emission engine, subtract 150 kg (331 lb) from rear axle weight and total weight.
Gross Vehicle Weight - Base** - Rear Axle: 45596lb
Gross Vehicle Weight - Base** - Front Axle: 17932lb
Gross Vehicle Weight - Maximum Tested - Rear Axle: 58753lb
Gross Vehicle Weight - Typically Equipped - Front Axle: 19253lb
Gross Vehicle Weight - Maximum Tested - Front Axle: 26125lb
Gross Vehicle Weight - Typically Equipped - Total: 71454lb
Gross Vehicle Weight - Typically Equipped - Rear Axle: 52201lb
Gross Vehicle Weight - Base** - Total: 63528lb
Gross Vehicle Weight - Maximum Tested - Total: 84877lb

Air Conditioning System

Air Conditioning: The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas.

Moldboard

Note: *Blade pull calculated at 0.9 traction coefficient, which is equal to ideal no-slip conditions, and Gross Machine Weight.
End Bit - Thickness: 0.75in
Blade Pull* - Maximum GVW: 52878lb
Down Force - Base GVW: 30743lb
Width: 16ft
Height: 31in
Down Force - Maximum GVW: 43861lb
Cutting Edge Thickness: 1in
Cutting Edge Width: 8in
Blade Pull* - Base GVW: 41039lb
Thickness: 1in
End Bit - Width: 6in
Throat Clearance: 5in
Arc Radius: 16.3in
Blade Width: 16ft

Blade Range

Maximum Shoulder Reach Outside of Tires - Right: 91in
Moldboard Sideshift - Left: 29.1in
Circle Centershift - Right: 22in
Maximum Depth of Cut: 18.5in
Maximum Lift Above Ground: 15.7in
Maximum Blade Position Angle: 65°
Blade Tip Range - Backward: 5°
Blade Tip Range - Forward: 40°
Moldboard Sideshift - Right: 31.1in
Maximum Shoulder Reach Outside of Tires - Left: 91in
Circle Centershift - Left: 27.2in

Tandems

Wheel Axle Spacing: 72.5in
Drive Chain Pitch: 2.5in
Height: 25.5in
Width: 9.3in
Tandem Oscillation - Front Down: 25°
Sidewall Thickness - Inner: 0.9in
Sidewall Thickness - Outer: 0.9in
Tandem Oscillation - Front Up: 15°

Frame

Front Axle - Height to Center: 26.4in
Front Axle - Wheel Lean: 18° Left/17° Right
Front Frame Structure - Thickness: 0.6in
Circle - Blade Beam Thickness: 2in
Circle - Diameter: 71.7in
Front Axle - Total Oscillation per Side: 35°
Drawbar - Width: 3in
Drawbar - Height: 8in
Front Frame Structure - Width: 14in
Front Frame Structure - Height: 18.1in

Service Refill

Circle Drive Housing: 2.6gal (US)
Front Wheel Spindle Bearing Housing: 0.24gal (US)
Tandem Housing - Each: 34gal (US)
Transmission - Differential - Final Drives: 34gal (US)
Engine Oil: 9.5gal (US)
Hydraulic System - Tank: 18.5gal (US)
Hydraulic System - Total: 38.6gal (US)
DEF Tank: 4.2gal (US)
Cooling System: 18.5gal (US)
Fuel Capacity: 131gal (US)

Hydraulic System

Pump Output*: 74gal/min
Note: *Pump output measured at 2,150 rpm.
Standby Pressure: 856psi
Pump Type: Variable piston
Maximum System Pressure: 3590psi
Circuit Type: Electro-hydraulic load sensing, closed center

Power Train

Brakes - Parking: Spring applied, hydraulically released
Brakes - Secondary: Oil-actuated, oil-disc
Brakes - Service: Oil-actuated, oil disc
Brakes - Dynamic Brake Torque per Wheel: 27069.27lb/ft
Transmission: Direct drive, power shift, countershaft
Forward/Reverse Gears: 8 Forward/6 Reverse

Dimensions (Approximate)

Height - Exhaust Stack: 140in
Length - Front Tire to Rear of Machine - Including Tow Hitch: 417in
Height - Front Axle Center: 28.9in
Width - Outside Front Tires: 134.3in
Height - Top of Cab: 146.4in
Length - Between Tandem Axles: 72.5in
Width - Outside Rear Tires: 134.3in
Width - Tire Center Lines: 106.4in
Height - Top of Cylinders: 121.6in
Length - Front Axle to Mid Tandem: 290in
Length - Front Axle to Moldboard: 120.7in
Length - Counterweight to Ripper: 474.4in
Ground Clearance - Rear Axle: 15.6in

Weights

Operating Weight - Typically Equipped: 71454lb

Standard/Optional Features

Standard Equipment:

Note
- Standard and optional equipment may vary. Consult your Cat dealer for details.
Operator Environment
- Adjustable Electric Arm rest
- Adjustable wrist rest
- Air conditioner with heater
- Articulation, automatic Return-to-Center
- Centershift pin indicator
- Coat hook
- Cup holder
- Display, digital speed and gear
- Doors, left and right side with wiper
- Gauges (analog) inside the cab (includes fuel, articulation, engine coolant temp, engine rpm, and hydraulic oil temp)
- Gauges, machine level
- Information display touch screen
- Joystick gear selection
- Joystick hydraulic controls for implements, steering, transmission
- Ladders, cab, left and right side
- Lights, left and right side lights
- Lights, night time cab
- Meter, hour, digital
- Mirror, inside rearview, wide angle
- Power port, 12V
- Radio ready, entertainment
- ROPS cab, sound suppressed, less than 73 dB(A) ISO 6394 (70% fan speed)
- Seat, cloth-covered, comfort air suspension
- Storage compartments
- Throttle control, electronic
Power Train
- Air cleaner, dual stage dry type radial seal with service indicator through messenger and automatic dust ejector
- Air-to-air after cooler (ATAAC)
- Auto Diff Lock
- Belt, serpentine, automatic tensioner
- Brake wear indication
- Brakes, oil disc, four-wheel, hydraulic
- Consistent Power to ground
- Critically Low Fluid Level Monitoring System
- Differential, lock/unlock
- Drain, engine oil, high speed
- Electronic over speed protection
- Engine ECO Mode: Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) and Tier 2/Stage II/Japan 2001 (Tier 2) equivalent emission standards
- Engine, compression brake
- Ether starting aid
- Fuel tank, fast fill, ground level
- Fuel-water separator
- Hydraulic Demand Fan
- Muffler, under hood (Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3)
- OK-to-Start
- Optimized VHP
- Parking brake – multi disc, sealed, oil-cooled
- Priming pump, fuel
- Rear axle, modular
- Sediment drain, fuel tank
- Three variations of the C13 engine. One meets U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final) emission standards and is required for sale in higher regulated countries. The other options are capable of meeting Tier 2/Stage II/Japan 2001 (Tier 2) or Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standards and are available for lesser or non-regulated countries, depending on the emission standards of the specific country.
- Transmission, 8F/6R, power shift
- VIMS no telematics
Electrical
- Alternator, 150 ampere, sealed
- Batteries, maintenance free, heavy duty, 1,400 CCA
- Breaker panel
- Electrical system, 24V
- Lights: brake, reversing, roof-mounted roading, stop and tail (LED), work front
- Product Link
- Starter, electric, heavy duty
Safety
- Alarm, back up
- Ground level engine shutdown
- Hammer (emergency exit)
- Horn, electric
- Lockout, hydraulic implement for roading
- Operator not present monitoring System
- Paint, glare reducing – top of front frame, rear enclosure an ripper cylinders
- Rearview camera
- Seat belt indicator
- Seat belt, retractable 76 mm (3 in)
- Secondary steering
- Windows, laminated glass: – Fixed front with intermittent wiper – Door with intermittent wipers (2)
- Windows, tempered: – Left and right side wipers – Rear with intermittent wiper
Other Standard Equipment
- 3-Bolt blade Bracket
- AccuGrade ARO
- Accumulators, blade lift
- Brake accumulators, dual certified
- Cat Grade Control Cross Slope
- CD ROM Parts Book
- Clutch, circle drive slip
- Cutting edges, curved DH-2 steel: – 203 mm × 25 mm (8 in × 1 in) – 19 mm (3∕4 in) mounting bolts
- Doors (four), engine compartment, (two left, two right hand) locking
- Doors, two service, left and right side
- Drawbar – six shoe with replaceable wear strips
- End bits, 16 mm (5∕8 in) DH-2 steel, 19 mm (3∕4 in) mounting bolts
- Fast fill fuel, 567.8 L/min (150 gpm)
- Fluid check
- Frame, articulated, with safety lock
- Hydraulics, load-sensing
- Metallic Fuel tank, 496 L (131 gal)
- Metallic DCM wear strips
- Modular cooling package
- Moldboard: – 4880 mm × 787 mm × 25 mm (16 ft × 31 in × 1 in) – Hydraulic side shift and tip
- Radiator, two cleanout access doors
- Rear bumper
- Rear tandem access steps and hand bars
- S∙O∙S ports: engine, hydraulic, transmission, coolant
- Tandem walkway
- Top adjust circle wear strips
- Tow hitch (not available with ripper)
Tires, Rims, And Wheels
- A partial allowance for tires on 597 mm × 609.6 mm (23.5 in × 24 in) multi-piece rims is included in the base machine price and weight
Fluids
- Extended Life Coolant to –35° C (–31° F)
Work Tools/g.e.t.
- 4.9 m (16 ft) blade with curved cutting edge 203 mm × 25 mm (8 in × 1 in)

Optional Equipment:

Note
- Standard and optional equipment may vary. Consult your Cat dealer for details.
Operator Environment
- Air horn
- Comfort package
- Heated door
- Mirrors high visibility
- Mirrors, outside heated 24V
- Mirrors, outside mounted
- Seat heated
- Seat heated/ventilated
- Windows cleaning platform and ladders left-right hand side
Power Train
- Transmission, autoshift
Guards
- Debris guard
- Front axle cylinder guard
- Rear fenders
- Sound suppression, engine enclosure and transmission
- Transmission guard
Electrical
- Light, LED, warning strobe
- Lights front LED
- Lights, front headlights high
- Lights, front headlights low
- Mounting, for warning light
- Service lights
- Working lights halogen
- Working lights LED
Safety
- Additional monitor for rearview camera
- Enhanced access platform
- Fire suppression ready
- Machine Security System Key
- Service access platform
Other Attachments
- Auto-lube, Centro-matic
- Auto-lube, ripper enhancement
- Control, blade, variable float
- Heater, engine coolant, 120V
- Heater, engine coolant, 240V
- Hydraulic arrangements with additional hydraulic valves Base+1
- Hydraulic arrangements with additional hydraulic valves Base+5
- Product Link Elite dual
- Rim, 495.3 mm × 635 mm (19.5 in × 25 in) MP (spare)
- Weather, Cold Plus package
Work Tools/g.e.t.
- 4.9 m (16 ft) blade with flat cutting edge 254 mm × 35 mm (10 in × 1 3∕8 in)
- Push block, counterweight
- Ripper, rear
- Tooth, ripper
Fluids
- Coolant, –51° C (–60° F)

Take The Virtual Product Tour To Explore The Features And Benefits of the 16 Motor Grader

See how 16 compares against frequently compared products

16 Motor Graders

Selected Model

120 / 120 AWD Motor Graders

View Full Specs