Home / Power Systems / Diesel Generator Sets / C18 Generator Set

C18 Generator Set

Request a Quote

Overview

Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.

Download Product Brochure Print

Cat Generator Set Package

Cat generator set packages have been fully prototype tested
Accepts 100% block load in one step and meets NFPA 110 loading requirements
Conform to ISO 8528-5 steady state and transient response requirements

Cat Diesel Engine

Reliable, rugged, durable design
Field-proven in thousands of applications worldwide
Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight

A-Frame Alternator

Superior motor starting capability minimizes need for oversizing alternator
Designed to match performance and output characteristics of Cat diesel engines
Robust Class H insulation

GCCP 1.2 Control Panel

User-friendly interface and navigation
Scalable system to meet a wide range of installation requirement
Expansion modules and site-specific programming for specific customer requirements

Cooling System

Designed to operate in standard ambient temperatures up to 55°C (131°F)
Contact your Cat Dealer for specific ambient and altitude capabilities

Certifications

UL2200 Listed; CSA 22.2; Certification of Compliance – IBC Seismic; Dual IBC & HCAI

One Safe Source

Components used in the generator set are selected based on seamless design integration to provide the optimum performance
The generator set is fully assembled at a Caterpillar facility following our quality guidelines
Each generator set package is tested before leaving the Caterpillar facility

World Wide Product Support

Cat dealers have over 1,800 dealer branch stores operating in 200 countries
Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements

Engine Specifications

Aspiration: Air to Air Aftercooled
Fuel System: Electronic unit injection
Engine Model: C18 ATAAC, I-6, 4-Stroke Water-Cooled Diesel
Bore: 145 mm (5.71 in)
Displacement: 18.13 L (1106.36 in³)
Stroke: 183 mm (7.2 in)
Compression Ratio: 14.5:1
Governor Type: Adem™A4
Aspiration: Air to Air Aftercooled
Fuel System: Electronic unit injection
Fuel System: Electronic unit injection
Displacement: 1106.4l
Bore: 5.71in
Stroke: 7.2in

Generator Set Specifications

Minimum Rating: 455 ekW
Maximum Rating: 600 ekW
Voltage: 208 to 600 Volts
Frequency: 60 Hz
Speed: 1800 rpm
Emissions/Fuel Strategy: U.S. EPA Cert., Tier 2
Duty Cycle: Standby, Prime

Generator Set Dimensions

Height - Maximum: 107.8in
Length - Maximum: 5550in
Width - Maximum: 80.9in

Standard/Optional Features

Standard Equipment:

Air Inlet
- Air cleaner
Air Inlet System
- Turbocharger
- Light duty air cleaner
- Aftercooler core
Cooling
- Caterpillar extended life coolant
- Fan drive, battery charging alternator drive
- Coolant drain line with valve
- Radiator and cooling fan with guard
- Package mounted radiator
Exhaust
- Exhaust flange outlet
Exhaust System
- Stainless steel exhaust flex gaskets, raincap and SAE exhaust flange for customer use - shipped loose
Fuel System
- Standard 8 hour open set fuel tank
Fuel
- Secondary fuel filters
- Fuel priming pump
- Primary fuel filter with integral water separator
Generator And Attachments
- Matched to the performance and output characteristics of Cat engines
- Segregated low voltage (AC/DC) wiring panel
- Power center, IP22
- A Frame generator - IP21 protection
- Integrated voltage regulator (IVR)
- Mandatory option circuit breaker, IEC, 3 pole, mounted in power centre
- Integrated voltage regulator (IVR)
Generator
- IP23 Protection
- Matched to the performance and output characteristics of Cat engines
- Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time
Power Termination
- Busbar
Control System
- GCCP 1.2
Governing System
- Cat electronic governor (ADEM A4)
Control Panel
- EMCP 4 Genset controller
Lube System
- Lubricating oil
- Oil drain valves
Mounting System
- Captive linear vibration isolators between base and engine-generator. includes lifting provisions and termination points for coolant and lube oil drain lines
Mounting
- Rubber vibration isolators
Starting/charging
- 24 Volt battery with rack and cables
- 24 volt starting motor
- Batteries
General
- Engine and alternator pre-paint, Caterpillar yellow
- Paint - Caterpillar yellow except rails and radiators gloss black

Optional Equipment:

Air Inlet System
- Single element air cleaner
- Dual element air cleaner
Exhaust
- Industrial, residential, critical mufflers
Generator
- Oversize and premium generators
- Excitation: [ ] Permanent magnet excitation (PMG) Excited (PM) [ ] Internally Excited (IE)
- Anti-condensation heater
Power Termination
- Circuit breakers, UL listed
- Circuit breakers, IEC compliant
Circuit Breakers
- 3 Pole (IEC-100% rated) Circuit breakers - Motorised
- 4 Pole (IEC-100% rated) Circuit breakers - Motorised
- Shunt trip for IEC breaker
- Power terminal strip
- Circuit breaker (IEC) Auxiliary contacts
- 3 Pole (IEC-100% rated) Circuit breakers - Package mounted
- Padlockable circuit breaker device
- 4 Pole (IEC-100% rated) Circuit breakers - Package mounted
Control Panels
- Remote monitoring software
- Load share module
- Local & remote annunciator modules
- GCCP 1.2, GCCP 1.5
- Digital I/O module
Control System
- Local alarm modules
- Volt free contact
- Local alarm horn
- Remote annunciator module
- Oil temperature displays
- Protective devices: Earth fault relay - earth leageage Ground fault relay - Overload shutdown via breaker - Low fuel level alarm - Low fuel level shutdown - High fuel level alarm - Fuel level sensor
- GCCP 1.5
Cooling System
- Low coolant temperature alarm
- Radiator duct flange
Enclosures
- Sound attenuated enclosures
Starting/charging
- Jacket water heater
- Battery chargers
- Heavy duty starting system
- Oversize batteries
- Charging alternator
Exhaust System
- 8 and 10 inch GP flanges
- 8 and 10 inch elbow kits
- Engine mounted muffler
- 10, 25 and 35 end in / end out mufflers
- Manifold and turbocharger guards
Fuel System
- Manual fuel transfer pump
- Fuel transfer system
- Integral - Dual wall fuel tank base
General
- Sound attenuated, weather protective or high ambient weather protective enclosure
- Integral & sub-base UL listed dual wall fuel tanks
- CSA Certification
- Automatic transfer switches (ATS)
- The following options are based on regional and product configuration:
- Single or dual wall sub-base fuel tanks
- EU Certificate of Conformance (CE)
- EEC Declaration of Conformity
- UL 2200 package
- Single or dual wall integral fuel tanks
- Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007
- Narrow, wide or skid base
- Enclosures: Sound attenuated, weather protective
Generator And Attachments
- Space heaters
- A Frame CIP generator
- Permanent magnet excitation (PMG)
- LC frame generator
- A Frame oversize generator
- Ingress protection
- LC frame CIP generator
- LC frame oversize generators
Lube System
- Manual sump pump
Starting And Charging
- Battery disconnect switch
- Jacket water heaters
- 5 Amp Battery charger

Take The Virtual Product Tour To Explore The Features And Benefits of the C18 Generator Set

See how C18 (60 Hz) compares against frequently compared products

C18 (60 Hz) Diesel Generator Sets

Engine Model: C18 ATAAC, I-6, 4-Stroke Water-Cooled Diesel
Voltage: 208 to 600 Volts
Maximum Rating: 600 ekW

Selected Model

C1.1 (50 Hz) Diesel Generator Sets

Engine Model: C1.1, In-line 4 4-cycle diesel
Voltage: 110 to 415 Volts
Maximum Rating: 9.5 kVA

View Full Specs

C18 Generator Set