Power Grid Stabilization (PGS) module

Overview

The Cat® Power Grid Stabilization (PGS) module is a scalable, rapidly deployable energy storage system. The PGS integrates with solar or other renewable sources to provide short duration power when the renewable source is not available. The PGS also provides reserve power to optimize generator set operation. The system may provide temporary backup power to facilities in the event of a power outage.

Reliable and Scalable
Factory prepackaged and tested
  • Pre-engineered containershipped as a single unit with batteries, inverter, isolation transformer and other equipment installed.
  • Parallel ready - multiple modules may be used in parallel to increase total output up to 100+MW.
Renewable Integration
  • Designed to work with an array of renewable systems, including solar and wind
  • Seamless integration with Cat Microgrid Master Controller (MMC) allows for maximum renewable penetration and full asset control
Transient Assist
When used with a generator set, the Cat PGS module will provide reserve power capacity to:
  • Decrease the transient voltage and frequency dips resulting from the application of large loads.
  • Enables highly-efficient lean-burn gas gensets to operate in island mode.
Grid Stabilization
  • Protects against many typical power problems, including power failure, voltage sags/surges, and under/over frequency conditions.
High Performance Inverter
  • Built-in controls for the charging and discharging of the energy storage equipment.
  • Static VAR compensator.
  • Four-quadrant output power factor control.
  • Automatic anti-islanding to meet UL 1741 and synchronization back to grid.
Applicable Standards and Certifications
UL Listed to the following standards (certification and mark pending):
  • UL 9540
  • UL 1741 SB
  • CSA C22.2 No. 107.1/16
  • cULus mark
Declarations (pending):
  • CE Declaration of conformity
  • IEC60204-1
Reliable and Scalable
Factory prepackaged and tested
  • Pre-engineered containershipped as a single unit with batteries, inverter, isolation transformer and other equipment installed.
  • Parallel ready - multiple modules may be used in parallel to increase total output up to 100+MW.
Renewable Integration
  • Designed to work with an array of renewable systems, including solar and wind
  • Seamless integration with Cat Microgrid Master Controller (MMC) allows for maximum renewable penetration and full asset control
Transient Assist
When used with a generator set, the Cat PGS module will provide reserve power capacity to:
  • Decrease the transient voltage and frequency dips resulting from the application of large loads.
  • Enables highly-efficient lean-burn gas gensets to operate in island mode.
Grid Stabilization
  • Protects against many typical power problems, including power failure, voltage sags/surges, and under/over frequency conditions.
High Performance Inverter
  • Built-in controls for the charging and discharging of the energy storage equipment.
  • Static VAR compensator.
  • Four-quadrant output power factor control.
  • Automatic anti-islanding to meet UL 1741 and synchronization back to grid.
Applicable Standards and Certifications
UL Listed to the following standards (certification and mark pending):
  • UL 9540
  • UL 1741 SB
  • CSA C22.2 No. 107.1/16
  • cULus mark
Declarations (pending):
  • CE Declaration of conformity
  • IEC60204-1

Technical Summary

Application
Transient Assist
Module Type
Grid stabilization
Rated Power
840-1260 kW
Nameplate Power
767 kW | 1000 kW
Nameplate Energy Capacity
448 kWh | 672 kWh

Standard/Optional Features

Standard Equipment:

  • Power Grid Stabilization
    • Cat BDP bi-directional power inverter
    • Energy storage batteries
    • Color HMI touchscreen
    • Remote communications via Modbus TCP
    • HVAC system to maintain interior temperature
    • Liquid / Air cooling
    • Isolation Transformer
    • Convenience receptacles
    • Fire suppression system

Optional Equipment:

Take The Virtual Product Tour To Explore The Features And Benefits of the Power Grid Stabilization (PGS) module

See how Power Grid Stabilization (PGS) Module compares against frequently compared products

Power Grid Stabilization (PGS) Module Battery Energy Storage Systems

Selected Model

Cat® BDP1000 Bi-Directional Power Inverter Battery Energy Storage Systems

View Full Specs

Telecom Hybrid Energy Systems Battery Energy Storage Systems

View Full Specs

Compare with other Cat Models

Compare Now

Media Gallery

Check out our current offers

View Specials
Translate »