C7.1 High Performance Propulsion Engine

C7.1 Marine Auxiliary Engine (U.S. EPA Tier 3 / IMO II)

Overview

C7.1 Marine Auxiliary Engine (U.S. EPA Tier 3 / IMO II)

Reliability & Durability
Superior response time and acceleration; 12V or 24V electrical system; Gear driven jacket water pump and sea water pump for superior reliability; Maintenance free valve train with hydraulic valve lash adjusters
Easy to use
Compatible with Cat® displays and electronics; Self priming fuel system ensures a smooth start every time
Environment friendly
No visible smoke; Common rail fuel system enables optimum combustion and low emissions; Reduced combustion noise through advanced electronic control; Closed crankcase ventilation system improves engine room cleanliness
Reliability & Durability
Superior response time and acceleration; 12V or 24V electrical system; Gear driven jacket water pump and sea water pump for superior reliability; Maintenance free valve train with hydraulic valve lash adjusters
Easy to use
Compatible with Cat® displays and electronics; Self priming fuel system ensures a smooth start every time
Environment friendly
No visible smoke; Common rail fuel system enables optimum combustion and low emissions; Reduced combustion noise through advanced electronic control; Closed crankcase ventilation system improves engine room cleanliness

Dimensions & Weights

Length
43.1in
Height
34.5in
Minimum Width
31.4in
Maximum Width
33.5in
Minimum Engine Dry Weight
1609lb
Maximum Engine Dry Weight
1676lb
Maximum Height
34.5in

Power Rating

Power Range
208 bkW (280 bhp) @ 2300 rpm

Engine Specifications

Configuration
In-line 6, 4-stroke-cycle diesel
Emissions
U.S. EPA Tier 3 / IMO II emissions certified (commercial), RCD 2016 compliant, EU Stage IIIA compliant, CCNR Stage II through reciprocity with EU Stage IIIA
Rated Engine Speed
2300 rpm
Bore
4.13in
Stroke
5.31in
Displacement
428in³
Aspiration
Turbocharged-aftercooled aspiration
Governor
Electronic (A5E2 V2 ECM)
Refill Capacity
Lube Oil System w/Oil filter change: 20 L (5.3 gal)
Oil Change Interval
500 hrs
Cooling
Heat exchanger or keel cooled
Flywheel Housing
SAE No. 03 with SAE 11.5 in flywheel
Rotation
Counterclockwise from flywheel end

Standard/Optional Features

Standard Equipment:

  • Cooling System
    • Gear driven jacket water pump
    • Corrosion resistant sea water aftercooler
    • Fuel cooler
  • Exhaust System
    • Watercooled turbocharger and exhaust manifold
  • Fuel System
    • Common rail fuel system
    • Electric fuel priming pump
  • General
    • Vibration damper and guard
    • Self-tensioning multi-vee belt drive
  • Lube System
    • Closed crankcase ventilation system
    • Integral engine oil cooler
  • Mounting System
    • Front and rear engine mounting brackets
  • Starting System
    • Starter motors - 12V or 24V

Optional Equipment:

  • Air Inlet System
    • Various 6" water cooled exhaust elbow configurations
  • Cooling System
    • Engine mounted bilge pumps and auxiliary water pumps with electromagnetic clutch
    • Tube and bundle jacket water heat exchanger and gear-driven sea water pump (rubber impeller)
    • Jacket water heater
    • Cabin heater (calorifier) connections
  • Fuel System
    • SOLAS double wall high pressure fuel lines kit
  • Lube System
    • Left-hand and right-hand oil dipsticks
    • Transmission gear oil cooler (engine mounted)
  • Protection System
    • Additional engine and transmission sensor packages for on or off vessel monitoring
  • Starting System
    • Engine mounted secondary alternator - 24V 100 amp or 12V 175 amp
    • Glow plugs

Take The Virtual Product Tour To Explore The Features And Benefits of the C7.1 Marine Auxiliary Engine (U.S. EPA Tier 3 / IMO II)

See how C7.1 Tier 3 / IMO II compares against frequently compared products

C7.1 Tier 3 / IMO II Auxiliary Engines

Configuration
In-line 6, 4-stroke-cycle diesel
Bore
4.13 in
Stroke
5.31 in
Selected Model

C4.4 (Electronic) Auxiliary Engines

Configuration
In-line 4, 4-stroke-cycle diesel
Bore
4.13 in
Stroke
5 in
View Full Specs

C7.1 Tier 3 / IMO II Auxiliary Engines

Configuration
In-line 6, 4-stroke-cycle diesel
Bore
4.13 in
Stroke
5.31 in
View Full Specs

Compare with other Cat Models

Compare Now

Media Gallery

Check out our current offers

View Specials
Translate »