D11

D11 Dozer

Overview

The Cat ® D11 Dozer delivers higher productivity at lower cost — for a reduction of up to 6% in overall cost per bank cubic meter compared to the previous model. Infused with performance-enhancing features, the D11 helps you improve the efficiency of your dozing operation. The torque divider with stator clutch automatically frees up the stator when torque is not required, delivering higher drivetrain efficiency for reduced fuel consumption. High-horsepower reverse speeds up non-productive traveling to reduce cycle time, while load-sensing hydraulics deliver more power to the dozer, increasing responsiveness and boosting fuel efficiency. Advanced technologies are completely integrated into the dozer, creating smart machines and more informed operators to maximize the productivity of your operation.

PERFORMANCE & EFFICIENCY
  • The torque divider with stator clutch automatically frees up the stator when torque is not required, delivering higher drivetrain efficiency for reduced fuel consumption.
  • High-horsepower reverse speeds up non-productive traveling for faster cycle times and up to 8% higher productivity.
OPERATOR COMFORT
  • The cab is unparalleled, with enhanced ergonomics, a fully adjustable air suspension seat, and controls that are easy to access and operate.
  • The suspended undercarriage absorbs impact and reduces the shock loads transferred to the undercarriage by up to 50% — resulting in a smoother, more comfortable ride.
SAFETY
  • The operator station offers exceptional visibility, with strategically located mirrors, clean line of sight to front and rear work areas, plus an optional 360 vision system for a bird’s-eye view.
  • The powered access ladder improves access and egress and has been updated with engine-off raise and lower capability. The cab door swing option allows left- or right-side opening.
TECHNOLOGY & INNOVATION
  • Automated Blade Assist (ABA) comes standard with the dual-tilt feature, automating the movement of the blade to several key preset pitch positions.
  • AutoCarry™ (optional) provides automatic blade control during the carry segment, helping to keep slip at the optimum level for best performance — increasing productivity up to 15%.
CAT MINESTAR™ SOLUTIONS
  • The D11 comes out of the factory ready to integrate Cat MineStar™ technology, which takes accuracy, efficiency and safety even further.
  • MineStar Command for dozing offers multiple levels of remote control and even semiautonomous operation, helping increase operator safety and comfort—as well as the productivity of the dozer fleet.
SERVICEABILITY
  • The AutoLube system, with ground-level fill and automatic shut-off capability, reduces daily maintenance.
  • Grouped maintenance points minimize movement around the machine, and ground-level access enables easier service for fluids and key electrical controls.
  • A 30% larger oil sump capacity extends 500-hour planned maintenance intervals and single-cooling system is easier to clean.
BLADES & ATTACHMENTS
  • Cat blades offer superior loadability and are aggressive in tough materials. The D11 features a 29.3° interior angle between the back bottom of the blade and the ground. This clearance angle allows the blade to better penetrate and load.
  • Cat blades have the ability to resist torsional bending and distortion and offer increased wear resistance without sacrificing machine balance or performance.
BUILT TO GO THE DISTANCE
  • The D11 is built to go the distance, with a redesigned case and frame for longer life, a larger equalizer bar with improved bearing, robust track roller frame, ripper and blade pin bores with replaceable bearings and replaceable push-arm trunnion bearing inserts.
  • The robust variable piston pumps for the new load-sensing hydraulic system run cooler for longer component and seal life.
SUSTAINABILITY
  • The D11 is designed to use less fuel, which reduces engine emissions.
  • The Tier 4 Final engine reduces NOx and particulate matter, plus the engine is compatible with diesel fuel blended with lower-carbon intensity fuels such as biofuels and renewable fuels.
  • Features like extended life filters and longer maintenance intervals decrease the amount of waste contributed to the environment.
PERFORMANCE & EFFICIENCY
  • The torque divider with stator clutch automatically frees up the stator when torque is not required, delivering higher drivetrain efficiency for reduced fuel consumption.
  • High-horsepower reverse speeds up non-productive traveling for faster cycle times and up to 8% higher productivity.
  • The high-efficiency load-sensing hydraulic system improves hydraulic implement response and fuel efficiency.
  • The in-cab multifunction touchscreen display is the operator’s gateway to monitoring machine performance and a convenient way to modify machine parameters to tailor performance to the current task.
OPERATOR COMFORT
  • The cab is unparalleled, with enhanced ergonomics, a fully adjustable air suspension seat, and controls that are easy to access and operate.
  • The suspended undercarriage absorbs impact and reduces the shock loads transferred to the undercarriage by up to 50% — resulting in a smoother, more comfortable ride.
  • Low-effort electronic steering, ripper and dozer controls are easily accessible and provide sure, precise maneuvering.
  • The standard isolation-mounted cab reduces noise and vibration, and conveniently located air circulation vents evenly distribute airflow for maximum comfort.
SAFETY
  • The operator station offers exceptional visibility, with strategically located mirrors, clean line of sight to front and rear work areas, plus an optional 360 vision system for a bird’s-eye view.
  • The powered access ladder improves access and egress and has been updated with engine-off raise and lower capability. The cab door swing option allows left- or right-side opening.
  • Access lighting can be controlled from the cab or the ground-level electrical center. Delayed egress lighting allows exiting the machine with lighting.
TECHNOLOGY & INNOVATION
  • Automated Blade Assist (ABA) comes standard with the dual-tilt feature, automating the movement of the blade to several key preset pitch positions.
  • AutoCarry™ (optional) provides automatic blade control during the carry segment, helping to keep slip at the optimum level for best performance — increasing productivity up to 15%.
  • Automatic Ripper Control (optional) automatically adjusts the engine speed and ripper depth to minimize track slip, reducing operator fatigue and decreasing wear and tear on the machine.
  • Cat Grade with 3D provides precise positioning of the cutting edge, eliminating the need for masts and cables on the blade. The system also reduces the need for grade staking and grade checking.
CAT MINESTAR™ SOLUTIONS
  • The D11 comes out of the factory ready to integrate Cat MineStar™ technology, which takes accuracy, efficiency and safety even further.
  • MineStar Command for dozing offers multiple levels of remote control and even semiautonomous operation, helping increase operator safety and comfort—as well as the productivity of the dozer fleet.
  • MineStar Terrain’s Automatic Blade Control feature provides full automatics, full blade load and overcut protection integrated into the machine control system.
  • MineStar Terrain for grading monitors ore bodies, bench heights, cycle times and volume of material cut and filled. Inputs from the office tell operators where to dig or cut, how much material to move, when they’ve moved enough and even if they’ve moved too much.
SERVICEABILITY
  • The AutoLube system, with ground-level fill and automatic shut-off capability, reduces daily maintenance.
  • Grouped maintenance points minimize movement around the machine, and ground-level access enables easier service for fluids and key electrical controls.
  • A 30% larger oil sump capacity extends 500-hour planned maintenance intervals and single-cooling system is easier to clean.
  • Redesigned pin joints eliminate the need for line boring and simplify replacement of the bearing inserts on the blade ripper and push-arm trunnions.
  • Continuous fluid monitoring on all compartments, including direct fluid monitoring of the hydraulic tank and pivot shaft reservoir, improves service life.
BLADES & ATTACHMENTS
  • Cat blades offer superior loadability and are aggressive in tough materials. The D11 features a 29.3° interior angle between the back bottom of the blade and the ground. This clearance angle allows the blade to better penetrate and load.
  • Cat blades have the ability to resist torsional bending and distortion and offer increased wear resistance without sacrificing machine balance or performance.
  • Specialty blades include high-capacity blades for light materials, including coal blades and reclamation blades.
  • Specialty attachments include multi-shank leach pad ripper, and multi-shank coal ripper (five shank), counterweight and rear drawbar with counterweight.
BUILT TO GO THE DISTANCE
  • The D11 is built to go the distance, with a redesigned case and frame for longer life, a larger equalizer bar with improved bearing, robust track roller frame, ripper and blade pin bores with replaceable bearings and replaceable push-arm trunnion bearing inserts.
  • The robust variable piston pumps for the new load-sensing hydraulic system run cooler for longer component and seal life.
  • Powertrain and main components are built to be rebuilt for a cost-effective second life of like-new performance at a fraction-of-new price.
SUSTAINABILITY
  • The D11 is designed to use less fuel, which reduces engine emissions.
  • The Tier 4 Final engine reduces NOx and particulate matter, plus the engine is compatible with diesel fuel blended with lower-carbon intensity fuels such as biofuels and renewable fuels.
  • Features like extended life filters and longer maintenance intervals decrease the amount of waste contributed to the environment.
  • By rebuilding machines and components, the Cat Rebuild and Cat Reman programs preserve raw materials, conserve energy and reduce emissions. In addition, retrofits and upgrades for older machines incorporate efficiency improvements and emission reductions, and keep them in production longer to conserve energy and minimize the need for raw materials.
  • Increased commonality of systems and components, plus a reduction in unique part numbers, reduces waste and lowers owning and operating costs.

Engine - U.S. EPA Tier 4 Final/EU Stage V

Engine Model
Cat® C32
Engine Power - Net SAE J1349/ISO 9249 - Forward
850hp
Displacement
1959in³
Engine Power - Net SAE J1349/ISO 9249 - Reverse
955hp
Note (1)
*Excludes all fan losses.
Note (2)
Engine ratings apply at 1,800 rpm.
Note (3)
Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.

Engine - U.S. EPA Tier 2 Equivalent

Engine Model
Cat® C32
Displacement
1959in³
Engine Power - Net SAE J1349/ISO 9249 - Forward
850hp
Engine Power - Net SAE J1349/ISO 9249 - Reverse
957hp
Note (1)
*Excludes all fan losses.
Note (2)
Engine ratings apply at 1,800 rpm.
Note (3)
Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.

Fuel Tank Capacities

Fuel Tank - Total Volume
500gal (US)
Fuel Tank - Usable Volume
475gal (US)

Service Refill Capacities

Cooling System
46.8gal (US)
Cooling System Refill - Tier 2 Equivalent Engine
41.7gal (US)
Engine Crankcase
35.1gal (US)
Power Train
120gal (US)
Power Train - Refill Volume
103.3gal (US)
Final Drive - Each
12.4gal (US)
Roller Frames - Each
24.8gal (US)
Hydraulic Tank
42.2gal (US)
Hydraulic System Tank and Chassis
64.7gal (US)
Hydraulic System Chassis + Blade and Ripper (Standard)
117.6gal (US)
Hydraulic System Chassis + Blade and Ripper (Carrydozer)
143.4gal (US)

Weights

Operating Weight
229800lb
Operating Weight - Carrydozer
250665lb
Note (1)
D11 Operating Weight: Includes blade tilt cylinders, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 11U ABR bulldozer, single-shank ripper with pin-puller, fast fuel, 710 mm (28 in) ES shoes, and operator.
Note (2)
D11 CD Operating Weight: Includes lubricant, coolant, full fuel tank, 915 mm (36 in) extreme service shoes, 11 Carrydozer, singleshank ripper, and operator.

Hydraulic Controls

Pump Type
Variable displacement piston pump
Combined Pump Output - Implement
177gal/min

Undercarriage

Shoe Type
Extreme Service
Width - Shoe
28in
Width - Shoe - CD
36in
Shoes/Side
41
Grouser Height
4in
Pitch
12.5in
Ground Clearance*
30.6in
Track Gauge
114in
Length - Track on Ground
175in
Ground Contact Area
9781in²
Ground Contact Area - CD
12605in²
Track Rollers/Side
8
Number of Carrier Rollers
1 per side (optional)

Air Conditioning System

Note (1)
The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warning Potential = 1430). The system contains 2.1 kg (4.6 lb) of refrigerant which has a CO2 equivalent of 3.003 metric tonnes (3.31 tons)

Standards

ROPS
Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008
FOPS
Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II
Sound (1)
The exterior sound pressure level for the standard machine (ISO 6396:2008) is 116 dB(A) (sound suppressed).
Sound (2)
The operator equivalent sound pressure level (ISO 6396:2008) is 78 dB(A) (sound suppressed).

Transmission

1.0 Forward
2.5mile/h
2.0 Forward
4.4mile/h
3.0 Forward
7.6mile/h
1.0 Reverse
3mile/h
2.0 Reverse
5.3mile/h
3.0 Reverse
9.1mile/h
Drawbar Pull - 3 Forward
46250ft·lbf
Drawbar Pull - 1 Forward
148200ft·lbf
Drawbar Pull - 2 Forward
82300ft·lbf

Blades

Semi-Universal (SU)* Capacity
35.6yd³
Semi-Universal (SU)* Width Over Endbits
219.8in
U-Blade Capacity
45yd³
U-Blade Width
249.6in
Reclamation Universal - Blade capacity (SAE J1265)
55yd³
Reclamation Universal - Width with blade (over end bits)
251.8in
Carry Dozer - Blade capacity (SAE J1265)
57yd³
Carry Dozer - Width with blade (over end bits)
263.9in

Ripper - Single Shank

Maximum penetration force * (shank vertical)
66000lb
Maximum penetration depth (standard tip)
63.5in
Pryout Force
148510lb

Ripper - Single Shank, Deep Ripping

Maximum penetration force * (shank vertical)
66110lb
Maximum penetration depth (standard tip)
85.5in
Pryout Force
148510lb

Ripper - Multi-Shank, Adjustable Parallelogram

Overall Beam Width
131.1in
Maximum Penetration Force - Shank Vertical
77350lb
Maximum Penetration - Standard Tip
43.3in
Pry-Out Force - Multi-Shank Ripper with One Tooth
145640lb

Dimensions - D11

Ground Clearance*
31.4in
Track Gauge
114in
Width at Outside of Track (710 mm Track Shoe)
142in
Height (ROPS/canopy)*
185.9in
Length of Track on Ground
175in
Length with SU-Blade** - No rear attachment
337.8in
Overall Length SU-Blade and SS Ripper**
414.4in
Note
*Includes grouser height for total dimensions on hard surfaces.

Dimensions - D11 Carrydozer

Width at Outside of Track (710 mm Track Shoe)
149.8in
Length with SU-Blade** - No rear attachment
345.1in
Overall Length SU-Blade and SS Ripper**
421.7in

Standard/Optional Features

Standard Equipment:

  • Operator Environment
    • ROPS/FOPS, Sound-Suppressed Cab
    • High-Definition Primary Touchscreen Display
    • Visibility – Rearview Mirrors
    • Air Conditioner and Heater with Automatic Climate Control
    • Seat – Cloth with Air suspension
    • Cab Glass – Single-Pane Tinted Safety
    • Cab Access – Blade Push Arm Steps and Grab Handle
  • Cat Technology Products
    • VIMS
    • Automated Blade Assist (ABA)
    • Cat Product Link Elite (cellular)
  • Cat Power Train
    • Cat C32 Engine – U.S. EPA Tier 4 Final or Tier 2 Equivalent
    • High-Performance Single-Plane Cooling Module
    • Stator Clutch Torque Divider – Electronic Control
    • Powershift Transmission – Three-Speed Electronic Shift
  • Undercarriage
    • Suspension Type Undercarriage
    • Sleeve Bearing Track
    • Lifetime-Lubricated Rollers and Idlers
    • Track Shoe (ES): 710 mm (28 in) Width
  • Hydraulics
    • Electronically Controlled, Load-Sensing Dozer Lift and Tilt
    • Electronically Controlled, Load-Sensing Ripper Lift and Pitch
    • Dozer Blade – Dual Tilt
    • Electronically Enabled Blade – Quick Drop
  • Electrical
    • 24V Electric Start, Dual Starters
    • Batteries – 4 × 4,200-Amp Hour, 12V
    • Battery Isolation
    • Lights – Halogen – 13 Positions
  • Service And Maintenance
    • Ecology Fluid Drains – All Compartments
    • Hinged Bottom Guards
    • High-Speed Oil Change – Engine and Transmission
    • Ground-Level Fast Fuel Fill
    • Ground-Level Electrical Service Station
    • S·O·SSM Fluid Sampling Ports
    • Diagnostic Connector

Optional Equipment:

  • Operator Environment
    • MineStar Terrain Display
    • Visibility – Dual Camera
    • Visibility – Four Cameras, 360 Degree View
    • Seat – Heated, Cooled, Adjustable Lumbar and Bolsters
    • Cab Glass – Dual-Pane Laminated Impact Safety
    • Cab Glass – High-Pressure Safety (40 psi/275 kPa)
    • Cab Access – Powered Ladder
  • Cat Technology Products
    • AutoCarry
    • Auto Ripper Control
    • Cat Terrain with 3D Blade Control
    • Cat Terrain Ready
    • Cat Product Link Elite Dual Mode (cellular + satellite)
    • Cat Command for Dozing Ready
  • Cat Power Train
    • Hydraulic Cooling Fan – Automatic Reversing
  • Undercarriage
    • Track Shoes (ES): 810/915 mm (32/36 in) Width (various configurations)
    • Track Links – High Abrasion – Tall Link
    • Track Links – Heavy Duty XL – Duralink
    • Track Shoe – Abrasion Resistant
    • Track Shoe – Anti-Packing Round Hole
    • Abrasion Rollers and Idlers
    • Cold Weather Rollers and Idlers
    • Sound Suppression Undercarriage
    • Carrier Roller
  • Hydraulics
    • Carrydozer Hydraulics
    • Dozer Extended Blade Pitch
    • Ripper Pin Puller
  • Electrical
    • Battery Isolation – Dual Pole
    • Lights – LED – Premium Package
  • Service And Maintenance
    • Sound Reduction Sealed Bottom Guards
    • Ground-Level Fluid Fill and Drain
    • Ripper Lubrication – Autolube with Ground-Level Fill
    • Ripper Lubrication – Grouped – Ground-Level Fill
  • Rear Attachments
    • Ripper – Single Shank with Pin Puller
    • Ripper – Single Shank Pushblock with Pin Puller
    • Ripper – Single Shank with Pin Puller – Heavy
    • Ripper – Multi Shank (three shank)
    • Ripper – Multi Shank – Heavy (three shank)
    • Ripper – Multi Shank Leach Pad with Pin Puller
    • Ripper – Multi Shank – Coal (five shank)
    • Counterweight – Rear
    • Drawbar with Counterweight
  • Blades
    • Semi-Universal (27.2 m³/35.6 yd³)
    • Universal (34.4 m³/45.0 yd³)
    • Carrydozer (43.6 m³/57 yd³)
    • Reclamation Universal (42 m³/55 yd³)
    • Reclamation Universal (53.5 m³/70 yd³)
    • Coal Universal (75 m³/98.0 yd³)
    • Coal Universal (65 m³/85.5 yd³)
  • Other
    • Fire Suppression Ready
    • Fire Suppression Installed

Take The Virtual Product Tour To Explore The Features And Benefits of the D11 Dozer

See how D11 compares against frequently compared products

D11 Dozers

Operating Weight
229800 lb
Operating Weight - Carrydozer
250665 lb
Selected Model

D9 Dozers

Operating Weight
229800 lb
Operating Weight - Carrydozer
250665 lb
View Full Specs

D10 Dozers

Operating Weight
229800 lb
Operating Weight - Carrydozer
250665 lb
View Full Specs

Compare with other Cat Models

Compare Now

Media Gallery

Check out our current offers

View Specials
Translate »