Home / New / Compact Wheel Loaders / Cat 908 Compact Wheel Loader

Cat 908 Compact Wheel Loader

Request a Quote

Overview

Cat® wheel loaders set the standard for productivity, fuel efficiency and operator comfort. The Cat 908 Compact Wheel Loader has a high torque C2.8 engine that works in conjunction with an intelligent hystat power train to deliver exceptional fuel efficiency. “Shift on the go” locking differentials and hydrostatic transmission provide smooth and powerful operation while increasing the efficiency of machine cycles.

Download Product Brochure Print

CONFIGURED FOR SUCCESS

Cat® wheel loaders set the standard for productivity, fuel efficiency and operator comfort. The Cat 908 Compact Wheel Loader has ahigh torque C2.8 engine that works in conjunction with an intelligent hystat power train to deliver exceptional fuel efficiency. Dependent on regional requirements our e...

ENJOY ALL DAY COMFORT

All new cab is spacious, quiet and comfortable with all around 360° visibility to keep you productive throughout the day. Seat-mounted controls feature a multifunction joystick for lift and tilt functions with an integrated thumb operated speed range, forward/neutral/reverse (FNR) switch, trigger operated differential lock and constant flow. Optional fourth function joystick also available.

EFFICIENTLY POWERFUL

Cat C2.8 engine provides a cleaner, quieter operation while delivering superior performance and durability through a high torque, low speed design. Caterpillar’s exclusive Intelligent Power Management system monitors operator input and available power to keep the machine working at peak efficiency.

WORK MADE EASY

All-in-one joystick to keep eyes on the work while maximizing operation of hydro-mechanical attachments with a state of the art pressure compensated electro-hydraulic system. Optimized Z-bar linkage for great performance and versatility with buckets that now have the DNA of the larger Cat loaders, such as curved side plates and a flat torque tube for parallel reference to the cutting edge.

CUSTOMIZE YOUR EXPERIENCE

Work as one with your machine by customizing the controls. Operator can adjust machine responsiveness with the push of a button based on the attachment or application. Once customized, settings can be locked with “simplified mode” to ensure the machine is consistent and intuitive for every user.

PURPOSE BUILT SPECIALTY MODELS

Machines can be built to meet industry and application specific needs: Agriculture, General Construction, Industrial and Waste, Landscaping or Snow Removal.
The 908 is availble with the following specific handler arrangements: Ag Handler and Waste Handler

AFTERMARKET AND SERVICES

Range of services and aftermarket retrofits and upgrades available to keep your machine going and configured for your application.
Service and maintenance parts available, including a range of self-service options (SSO) and dealer installed kits.
Integrated Technology available to reduce service costs and maintenance.

SUSTAINABILITY

The Cat® C2.8 engine meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Engine Idle Shutdown Timer reduces fuel burn, greenhouse gas emissions and unnecessary idle time by shutting down the machine after a pre-set idling period.
Remote Troubleshoot decreases maintenance time and keeps your machine running with maximum efficiency by allowing your Cat dealer to virtually test the machine while working. Once a problem is identified, a technician can fix it the first time, saving time and money.

Engine

Maximum Gross Power: 74.7hp
Engine Model: Cat C2.8*
Maximum Engine Speed: 2550 rpm
Maximum Gross Power - Rated Engine Speed: 2400r/min
Maximum Gross Power - SAE J1995: 74.7hp
Maximum Gross Power - ISO 14396: 74.3hp
Maximum Gross Power - ISO 14396 (metric): 75.3mhp
Rated Net Power - Rated Engine Speed: 2400r/min
Rated Net Power - SAE J1349: 72.7hp
Rated Net Power - ISO 9249: 72.1hp
Rated Net Power - 2,400 rpm - ISO 9249 (metric): 73.1mhp
Maximum Gross Torque - SAE J1995: 222lb/ft
Maximum Gross Torque - ISO 14396: 221lb/ft
Maximum Net Torque - SAE J1349: 218lb/ft
Maximum Net Torque - ISO 9249: 217lb/ft
Displacement: 171in³
Bore: 3.54in
Stroke: 4.33in
Note: Advertised power is tested per the specified standard in effect at the time of manufacture
Note (1): Net power advertised is the power available at the flywheel.
Note (2): *Two Cat C2.8 engine emission options are available: 1) Meets U.S. EPA Tier 4 Final, EU Stage V. 2) U.S. EPA Tier 3 and EU Stage IIIA equivalent. Tier 3 engine specs are 0.3 kW/0.4 hp more gross power (SAE J1995), 0.2 kW/0.3 hp on net power (SAE J1349)
Note (3): #Maximum gross and net torque measured at 1,600 rpm.

Weights

Operating Weight: 14617lb

Buckets

Bucket Capacities: 0.75-1.55 m³ (1.0-2.0 yd³)
Bucket Capacities - General Purpose: 0.80-1.35 m³ (1.0-1.7 yd³)
Multi-Purpose: 0.75-1.1 m³ (1.0-1.4 yd³)
Bucket Capacities - Light Material: 1.25-1.55 m³ (1.6-2.0 yd³)
Note: Bucket selection must be made with an understanding of the material density and application to ensure machine stability is maintained within the tipping loads stated per model and configuration.
Note (1): Bucket capacities stated include BOCE, in line with ISO 7546.

Service Refill Capacities

Fuel Tank: 24Gal
Cooling System: 3.2Gal
Engine Crankcase: 2.3Gal
Axles - Front Center Differential: 2.3Gal
Axles - Rear Center Differential: 2.3Gal
Hydraulic System - Including Tank: 18.6Gal
Hydraulic Tank: 11.8Gal
Transmission: 0.6Gal
Note: No Diesel Exhaust Fluid (DEF) fluid needed on this size engine.

Axles

Front: Fixed (standard), Locking Differential (optional)
Rear: Fixed (standard), Locking Differential (optional)
Note: Oscillation of ±11 degrees via hitch between front and rear frames.

Steering

Steering Articulation Angle - Each Direction: 39°
Maximum Flow - Steering Pump: 12.3gal/min
Maximum Working Pressure - Steering Pump: 3336psi
Steering Cycle Times – (full left to full right) – at High Idle: 2.8s
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left: 3.25 turns or 4.00 turns

Transmission

Forward and Reverse - Speed Range Creep#: 6mile/h
Forward and Reverse - Speed Range 1*: 6mile/h
Forward and Reverse - Speed Range 2** - High Speed: 10.5mile/h
Forward and Reverse - Speed Range 2** - Standard: 12mile/h
Forward and Reverse - Speed Range 3***: 25mile/h
Note: #Factory default shown, can be adjusted to any speed up to 19 km/h (12 mph).
Note (1): *Creep function not available in this gear or above.
Note (2): **Max speed dependent on model and configuration (standard vs. high speed transmission).
Note (3): ***Reverse is 30 km/h (19 mph).

Tires

Tire Size - Standard: *405/70 R20 SPT9
Tire Size - Optional: 405/70 R20 Powerloads
Tire Size - Optional (1): 400/70 R20 XMCL/Bibload
Tire Size - Optional (2): 360/80 R20 TRI 2
Tire Size - Optional (3): 40X14-20 TL, SM/TR
Note: *This tire has been used for all dimension, stability and performance data.
Note (1): Other tire choices are available. Contact your Cat dealer for details.
Note (2): Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.

Cab

ROPS: ISO 3471:2008
FOPS: ISO 3449:2005 Level II
Note (1): Canopy and cab, Rollover Protective Structures (ROPS) are available worldwide. Canopy not available in EU.

Loader Hydraulic System

Main Relief - 1st Auxiliary (3rd slice): 3408psi
Main Relief - 1st Auxiliary (3rd slice) - Standard Flow*: 24gal/min
Main Relief - 1st Auxiliary (3rd slice) - High Flow*: 33gal/min
Main Relief - 2nd Auxiliary (4th slice): 3408psi
Main Relief - 2nd Auxiliary (4th slice) - Flow: 12gal/min
Hydraulic Cycle Time - Rackback: 2.5s
Hydraulic Cycle Time - Lift: 5.8s
Hydraulic Cycle Time - Dump: 1.8s
Hydraulic Cycle Time - Float Down: 3.6s
Note: * Maximum flow stated, actual flow delta could be 6% from data shown. Also adjustable from 20% to 100% of maximum flow through display.

Dimensions - With HPL-V Coupler - Approximate#

Height: Ground to Cab**: 8.75ft
Height: Ground to Beacon**: 9.33ft
Height: Ground Axle Center**: 1.67ft
Height: Ground Clearance**: 1ft
Length: Overall*: 18.17ft
Length: Rear Axle to Bumper: 4.5ft
Length: Hitch to Front Axle: 3.5ft
Length: Wheel Base: 7.08ft
Clearance: Bucket at 45° *: 8.58ft
Clearance: Load over Height**: 9.75ft
Clearance: Level Bucket**: 10.5ft
Height: Bucket Pin**: 11.17ft
Height: Overall**: 14.17ft
Reach: Bucket at 45° *: 2.33ft
Carry Height: Bucket Pin: 1.17ft
Dig Depth**: 0.33ft
Width: Bucket: 6.75ft
Width: Tread Center: 5.08ft
Turning Radius: Over Bucket: 14.75ft
Width: Over Tires: 6.67ft
Turning Radius: Outside of Tires: 13.17ft
Turning Radius: Inside of Tires: 6.5ft
Rack Angle at Full Lift: 53°
Dump Angle at Full Lift: 45°
Rack Angle at Carry: 51°
Departure Angle - Degrees: 30°
Articulation Angle - Degrees: 39°
Operating Weight: Bucket ^: 14633lb
Tipping Load - Straight - ISO 14397-1 †: 10626lb
Tipping Load - Full Turn - ISO 14397-1 †: 8895lb
Operating Weight: Carriage and Tines ^^: 14252lb
Tipping Load - Straight †: 10626lb
80% of Tip: Firm and Level EN474-3 ††: 5815lb
Note (1): *Vary with bucket
Note (2): **Vary with tire
Note (3): ^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), 1.15 m3 (1.5 yd3) general purpose bucket.
Note (4): ^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class III carriage, 1220 mm (4 ft) tines (500 mm [20 in] load center).
Note (5): †Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.
Note (6): ††Full compliance to EN474-3 and SAE J1197.
Note (7): #HPL-A weight, tipping and rated loads are within 1% of the HPL-V.
Note (8): Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9 405/70 R20 tires and 1.15 m3 (1.5 yd3) general purpose bucket with bolt-on cutting edge or a class II
Note (9): Note: Goodyear POWERLOAD® tires can add up to approximately 140 kg (305 lb) to the full turn tip load and reduce vertical height by approximately 25 mm (1 in) compared to SPT9
Length: Front Axle to Front of Coupler: 3.92ft

Dimensions - With SSL Coupler - Approximate

Height - Ground to Cab: 8.75ft
Height: Ground to Beacon**: 9.33ft
Height: Ground Axle Center**: 1.67ft
Height - Ground Clearance: 1ft
Length - Overall with Bucket: 18.67ft
Length: Rear Axle to Bumper: 4.5ft
Length: Hitch to Front Axle: 3.5ft
Length - Wheel Base: 7.08ft
Clearance - Bucket at 45°: 8.25ft
Clearance: Load over Height**: 9.75ft
Clearance - Level Bucket: 10.5ft
Height - Bucket Pin: 11.17ft
Height: Overall**: 14.42ft
Reach - Bucket at 45°: 2.67ft
Carry Height: Bucket Pin: 1.25ft
Dig Depth: 0.45ft
Width - Bucket: 6.75ft
Width - Tread Center: 5.08ft
Turning Radius - Over Bucket: 15.08ft
Width - Over Tires: 6.67ft
Turning Radius: Outside of Tires: 13.17ft
Turning Radius - Inside Tire: 6.67ft
Rack Angle at Full Lift: 50°
Dump Angle at Full Lift: 48°
Rack Angle at Carry: 54°
Departure Angle - Degrees: 30°
Articulation Angle - Degrees: 39°
Operating Weight: Bucket ^: 14752lb
Tipping Load – Straight – ISO 14397-1 †: 9581lb
Tipping Load – Full Turn – ISO 14397-1 †: 8141lb
Operating Weight: Carriage and Tines ^^: 14391lb
Tipping Load - Straight †: 9753lb
80% of Tip: Firm and Level EN474-3 ††: 5438lb
Note (1): *Vary with bucket
Note (2): **Vary with tire
Note (3): ^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), 1.15 m3 (1.5 yd3) general purpose bucket.
Note (4): ^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class III carriage, 1220 mm (4 ft) tines (500 mm [20 in] load center).
Note (5): †Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.
Note (6): ††Full compliance to EN474-3 and SAE J1197.
Note (7): #HPL-A weight, tipping and rated loads are within 1% of the HPL-V.
Note (8): Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9 405/70 R20 tires and 1.15 m3 (1.5 yd3) general purpose bucket with bolt-on cutting edge or a class II
Note (9): Note: Goodyear POWERLOAD® tires can add up to approximately 140 kg (305 lb) to the full turn tip load and reduce vertical height by approximately 25 mm (1 in) compared to SPT9
Tipping Load - Full Turn - ISO 14397-1†: 6800lb
Length: Front Axle to Front of Coupler: 4.75ft

Dimensions - High Lift - With HPL-V Coupler - Approximate#

Height: Ground to Cab**: 8.75ft
Height: Ground to Beacon**: 9.33ft
Height: Ground Axle Center**: 1.67ft
Height: Ground Clearance**: 1ft
Length: Overall*: 19.67ft
Length: Rear Axle to Bumper: 4.5ft
Length: Hitch to Front Axle: 3.5ft
Length: Wheel Base: 7.08ft
Clearance: Bucket at 45° *: 10.92ft
Clearance: Load over Height**: 10.75ft
Clearance: Level Bucket**: 12.08ft
Height: Bucket Pin**: 12.75ft
Height: Overall**: 15.67ft
Reach: Bucket at 45° *: 3.25ft
Carry Height: Bucket Pin: 1.17ft
Dig Depth**: 0.33ft
Width: Bucket: 6.75ft
Width: Tread Center: 5.08ft
Turning Radius: Over Bucket: 15.83ft
Width: Over Tires: 6.67ft
Turning Radius: Outside of Tires: 13.17ft
Turning Radius: Inside of Tires: 6.5ft
Rack Angle at Full Lift: 69°
Dump Angle at Full Lift: 40°
Rack Angle at Carry: 48°
Departure Angle - Degrees: 30°
Articulation Angle - Degrees: 39°
Operating Weight: Bucket ^: 14848lb
Tipping Load - Straight - ISO 14397-1 †: 9187lb
Tipping Load - Full Turn - ISO 14397-1 †: 7645lb
Operating Weight: Carriage and Tines ^^: 14542lb
Tipping Load - Straight †: 9187lb
80% of Tip: Firm and Level EN474-3 ††: 4706lb
Note (1): *Vary with bucket
Note (2): **Vary with tire
Note (3): ^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), 1.15 m3 (1.5 yd3) general purpose bucket.
Note (4): ^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class III carriage, 1220 mm (4 ft) tines (500 mm [20 in] load center).
Note (5): †Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.
Note (6): ††Full compliance to EN474-3 and SAE J1197.
Note (7): #HPL-A weight, tipping and rated loads are within 1% of the HPL-V.
Note (8): Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9 405/70 R20 tires and 1.15 m3 (1.5 yd3) general purpose bucket with bolt-on cutting edge or a class II
Note (9): Note: Goodyear POWERLOAD® tires can add up to approximately 140 kg (305 lb) to the full turn tip load and reduce vertical height by approximately 25 mm (1 in) compared to SPT9

Dimensions - High Lift - With SSL Coupler - Approximate

Height: Ground to Cab**: 8.75ft
Height: Ground to Beacon**: 9.33ft
Height: Ground Axle Center**: 1.67ft
Height: Ground Clearance**: 1ft
Length: Overall*: 20.17ft
Length: Rear Axle to Bumper: 4.5ft
Length: Hitch to Front Axle: 3.5ft
Length: Wheel Base: 7.08ft
Clearance: Bucket at 45° *: 10.42ft
Clearance: Load over Height**: 10.75ft
Clearance: Level Bucket**: 12.08ft
Height: Bucket Pin**: 12.75ft
Height: Overall**: 15.92ft
Reach: Bucket at 45° *: 3.42ft
Carry Height: Bucket Pin: 1.25ft
Dig Depth**: 0.42ft
Width: Bucket: 6.75ft
Width: Tread Center: 5.08ft
Turning Radius: Over Bucket: 16.17ft
Width: Over Tires: 6.67ft
Turning Radius: Outside of Tires: 13.17ft
Turning Radius: Inside of Tires: 6.5ft
Rack Angle at Full Lift: 66°
Dump Angle at Full Lift: 40°
Rack Angle at Carry: 42°
Departure Angle - Degrees: 30°
Articulation Angle - Degrees: 39°
Operating Weight: Bucket ^: 15070lb
Tipping Load - Straight - ISO 14397-1 †: 8385lb
Tipping Load - Full Turn - ISO 14397-1 †: 6943lb
Operating Weight: Carriage and Tines ^^: 14714lb
Tipping Load - Straight †: 8385lb
80% of Tip: Firm and Level EN474-3 ††: 4375lb
Note (1): *Vary with bucket
Note (2): **Vary with tire
Note (3): ^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), 1.15 m3 (1.5 yd3) general purpose bucket.
Note (4): ^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class III carriage, 1220 mm (4 ft) tines (500 mm [20 in] load center).
Note (5): †Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.
Note (6): ††Full compliance to EN474-3 and SAE J1197.
Note (7): #HPL-A weight, tipping and rated loads are within 1% of the HPL-V.
Note (8): Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9 405/70 R20 tires and 1.15 m3 (1.5 yd3) general purpose bucket with bolt-on cutting edge or a class II
Note (9): Note: Goodyear POWERLOAD® tires can add up to approximately 140 kg (305 lb) to the full turn tip load and reduce vertical height by approximately 25 mm (1 in) compared to SPT9

Sustainability

Recyclability: 93%

Standard/Optional Features

Standard Equipment:

Power Train
- Emissions compliant, two options (Dependent on regional regulations.)
  – U.S. EPA Tier 4 Final and EU Stage V
  – U.S. EPA Tier 3 and EU Stage IIIA equivalent
- Cat C2.8 engine
  – Diesel particulate filter (Fit for Life) or muffler (Dependent on regional regulations.)
  – Fuel, diesel, ultra low or low Sulphur (Dependent on regional regulations.)
  – Hydrostatic transmission, two speed, with inching function, “shift on the go”
  – Power train mode, hystat
- Air cleaner, two stage filter, with in cab audio/visual indicator on display
- Axles, heavy duty, frame mounted with outboard planetary reduction
- Closed circuit breather
- Coolant, extended life, –36° C (–33° F)
- Drive shaft, sealed for life, universal joints
- Engine, auto idle shutdown, hibernation mode
- Engine oil, ECO drain tap and hose
- Fuel pump, priming (manual)/water separator/drain
Hydraulics
- Hydraulic pilot shut off switch, in cab
- Electro-hydraulic, fully proportional controls
- Dead engine lower, lift valve, manual
- Demand cooling fan, hydraulically drive
- Coupler/pin on attachment ready
- Caterpillar HYDO^™ Advanced 10 hydraulic oil
- Hystat displacement pump, infinitely variable
- Implement valve, pressure compensated
- Joystick, single lever, single auxiliary roller
- Multi-function lift and tilt with loader arm float
- Motor, single drive with dedicated implement and steering pumps
Electrical
- Alternator, 100 amp sealed
- Battery, heavy duty, 12V, 90Ah and 1,000 CCA
- Battery disconnect switch
- Cab mounted fuse panel
- Lights, rear stop and turn, LED
- Lights, roading, front halogen
- Service (Electronic Technician^™)
- Product Link^™
Operator Environment
- ROPS/FOPS certified canopy/cab
  – 12V power outlets, interior/exterior
  – Pedals, raised, foot, brake/inching, accelerator
  – Lever, parking brake
  – Cup holders (2)
  – CB radio clip, phone holder
  – Door release, internal (left and right)
  – Hook, large, coat and hard hat
  – Floormat, heavy duty, easy clean
  – Mirrors, (2) external breakaway, (1) internal
  – Operator station on isolation mounts
  – Steering wheel, spinner knob, horn in center
  – Seat belt, orange, retractable, 51 mm (2 in)
  – Storage, personal (trays [3], seat pocket)
  – Steering column, tilt adjusted
  – Column mounted multi function control: lights, roading, wipers, self cancelling turn signals
  – Quick coupler switch, in cab
- Display, analog and digital
  – Gauges (2), hydraulic oil, engine coolant
  – Digital with soft touch buttons – fuel level, speed range, speedometer, service hour meter, service/maintenance information, hydraulic and power train performance and aggressiveness settings, security passcode (multiple languages)
- Joystick, seat mounted, standard multifunction
  – FNR, auxiliary roller, speed range select, continuous flow, differential lock, horn
  – Arm rest, padded right, multiple position vertical height
- Seat, manual height adjustment, (cab) fabric with adjustable left arm rest, (canopy) vinyl
- Cab
  – Doors (2), fixed glass
  – Wipers, front and rear, full front coverage
  – Windshield, front single piece
  – Window, rear heated
  – Radio ready, speakers and wiring
  – Air vents, (4) screen, (7) directional
  – Heating, mechanical control unit
  – Sun visor, solid, front full width
  – Interior light (incandescent)
Other
- Fenders, front and rear
- Ground level easy access daily service points
- Loader arm safety brace
- Lockable main and side engine enclosures
- Lockable, fuel cap, HVAC filters, nose cone
- Machine lifting/tie down points
- Paint, Electro-Coat primer, gloss topcoat
- Recovery hitch with pin
- Scheduled Oil Sampling (S·O·S℠) ports, engine oil and hydraulic oil

Optional Equipment:

Power Train
- Antifreeze, extended life coolant, –50° C (–58° F)
- Cold start – jacket water heater, bypass valve
- Creep and throttle lock function
- Fuel pump, priming, electric (Dependent on regional regulations.)
- 40 km/h (25 mph) hydrostatic transmission, 3-speed, “shift on the go”, secondary steering and boosted brakes
- Power train mode, utility (includes keypad)
Electrical
- Lighting packages, multiple; front, rear, engine bay (LED or HAL)
- Push to start
- Work tool wiring harness, (3) in cab switches
Hydraulics
- Auxiliary flow, single standard (3) valve, single high flow (3) valve, dual high flow (4) valve
- Caterpillar Bio HYDO Advanced hydraulic oil
- Connect under pressure and case drain
- Ride Control or load check valves*
- Reversing fan
- Quick disconnect auxiliary hydraulics
Operator Station
- Air Conditioning, automatic temperature control (ATC)
- Doors, sliding windows (left and right)
- Interior light, door activated
- Joystick, FNR, twin auxiliary roller, differential lock, horn
- Joystick, seat mounted, multifunction
- Mirrors (2) electronically adjustable, heated external, plus lower parabolic mirror
- Phone holder, spring loaded
- Radio, FM or digital audio broadcast
- Seat belt options, multiple
- Seat packages; deluxe or premium
- Secondary display, front or rear view camera
- Soft touch keypad options, 8 or 16 button
- Storage, lockable box or lockable cooled box
- Sun visor, rear perforated
- USB ports (2), interior
Other
- Couplers, vertical (SSL), horizontal (HPL-V, HPL-A)
- Rotary sensors (snubbing, kickouts, parallel)
- High lift option