contact us
call us
locations
A68 Auger
Cat® Augers are used for drilling holes for footings, fencing, signs, trees and shrubs in construction, agricultural, and landscaping applications. They are designed with the right amount of speed and torque for maximum productivity in a broad range of soil types.
Request a Quote
Product Specs
Dimensions
- Drive Shaft Torque @ Max Pressure
- 5040lb ft
- Drive Method
- Gerotor Motor - Double Planetary Reduction
- Mounting Bracket Design
- Mini Hydraulic Excavator
- Required Hydraulics
- High Flow XPS
- Overall Width w/ bracket
- 11in
- Overall Length w/ bracket
- 14in
- Overall Drive Unit Height
- 36in
- Housing Diameter
- 11in
- Swing Range (fore/aft)
- 60 degrees
- Swing Range (L/R)
- 76 degrees
- Hex Output Shaft Size
- 2in
- Drive Unit Weight (w/o Bits)
- 234lb
- Required Hydraulic Flow
- 95-130 L/min (25-34 gpm)
- Optimal Hydraulic Pressure
- 207-290 bar (3002-4206 psi)
- Effective Displacement
- 2.67in³
- Bit Speed at Maximum Flow
- 81 rpm
- Hex Output Shaft Size
- 2in
- Drive Shaft Torque at Maximum Pressure
- 5034.6lb/ft
- Drive Method
- Gerotor Motor - Double Planetary Reduction
- Mounting Bracket Design
- 5 Ton Mini Excavator Pin On
- Drive Gear Reduction
- 34:1
- Optimal Hydraulic Pressure
- 207-290 bar (3002-4206 psi)
- Overall Width - With Bracket
- 11.4in
- Required Hydraulic Flow
- 95-130 L/min (25-34 gpm)
- Required Hydraulics
- High Flow XPS
- Overall Length - With Bracket
- 14.2in
- Swing Range (L/R)
- 76 degrees
- Optimal Hydraulic Flow
- 95-130 L/min (25-34 gpm)
- Overall Height
- 36.1in
- Weight
- 233.7lb
- Motor Displacement
- 2.67in³
Standard/Optional Features
Standard Equipment:
Optional Equipment:
-
- Buckets
-
- Wide: 4.2 m3 (5.5 yd3), Performance Series